Tel: 0114 2753666
Fax: 0114 2754183
Opening Times
Mon -Fri 7:30am - 5pm
Sat: 8:30am - 12noon
  |
 |
 |
 |
| Diamond drill hire sheffield, also hire of pneumatic angle drills, magnetic drills dr bender morse taper 4, rotabores, tapping head machines and much more for hire. | |||
| Designed to fit into tight space’s, we have a unrivalled range of angle drills. Suitable for drilling into metal, wood or concrete. The machines are powered either by electric or compressed air. capacities range from 1mm upto 50mm. Attachments can be supplied enabling use of rotabore cutters. | |||
Description |
Day rate | Week rate | |
10mm capacity 110 volts length 80mm |
£14.00 | £28.00 | |
13mm capacity 110 volts length 140mm |
£15.00 | £30.00 | |
16mm capacity. SDS fitting Rotary Hammer 110 volts length 125mm |
£26.00 | £52.00 | |
 |
10mm capacity chuck pneumatic req. 8cfm length 100mm |
£15.00 | £30.00 |
23mm capacity M/T 2 fitting pneumatic req. 46 cfm length 160mm |
£33.00 | £66.00 | |
32mm capacity M/T 3 fitting pneumatic req. 76 cfm length 190mm |
£49.00 | £98.00 | |
50mm capacity M/T 4 fitting pneumatic req. 102cfm length 240mm |
£60.00 | £120.00 | |
| |
|||
| The battery operated machines give the freedom to work where it is difficult to obtain power and avoid long tangled leads. All machines come with 2 two batteries. | |||
Description |
Day rate | Week rate | |
Drill Driver 13mm capacity |
£11.00 | £22.00 | |
Percussion Drill 13mm capacity |
£12.50 | £25.00 | |
Rotary Hammer SDS 28 volts |
£17.50 | £35.00 | |
| |
|||
| For drilling through reinforced concrete, tiles, masonry and stone. All rigs come c/w vacuum suction pump, base and water pressure pump. Hand held units comes with water pressure pump. Diamond drill bits are available either for purchase or hire at a wear rate per mm. | |||
Description |
Day rate | Week rate | |
Hand held unit 65mm capacity 110 volts |
£37.50 | £75.00 | |
Small rig 90mm capacity 110 volts |
£75.00 | £150.00 | |
Large rig 250mm capacity 110 volts |
£107.50 | £215.00 | |
| |
|||
| A useful all purpose drilling machine for drilling steel, plastics, wood and soft masonry. | |||
Description |
Day rate | Week rate | |
13mm capacity 240/110 volts variable speed |
£9.00 | £18.00 | |
16mm capacity 110 volts 2 speed variable |
£12.50 | £25.00 | |
| |
|||
| A range of portable drilling machines that have magnetic bases allowing them to be securely fixed to mild steel. Various attachments are available to allow drilling of stainless steel and pipes. A range of Morse taper drill bits are available for hire or purchase | |||
Description |
Day rate | Week rate | |
13mm capacity chuck 110 volts single speed 550 rpm weight 12.5 kg |
£35.00 | £70.00 | |
32mm capacity morse taper 3 110 volts 4 speed 220/250/350/420 rpm wght 28kg |
£40.00 | £80.00 | |
|
32mm capacity morse taper 3 swivel base 110volts 4 speed 110/175/245/385rpm weight 34 kg |
£42.00 | £84.00 |
| 32mm capacity morse taper swivel base 110volts. two variable speeds 50-130rpm / 160-460rpm weight 25kg | £45.00 | £90.00 | |
50mm capacity morse taper 4 swivel base 110volts 5 speed 60/115/220/450/2000 rpm weight 55 kg |
£110.00 | £220.00 | |
| |
|||
| Use as the magnetic drills, but use milling cutters to give precise clean holes. Cutters are available to hire or buy. | |||
Description |
Day rate | Week rate | |
| Angle rotabore max 27mm diameter through 18mm thickness 110volts. Max height 150mm. Special cutters available for sale | £40.00 | £80.00 | |
30mm capacity 110 volts single speed 450 rpm weight 8.5kg |
£35.00 | £70.00 | |
40mm capacity 110 volts 2 speed 280/500 rpm weight 12.5 kg |
£35.00 | £70.00 | |
| 50mm capacity pneumatic 2-speed magnetic rotabore/rotabroach. | £42.50 | £95.00 | |
85mm capacity 110 volts 4 speed 220/250/350/420 rpm weight 28kg |
£40.00 | £80.00 | |
100mm capacity 110volts swivel base 4 speed 110/175/245/385 rpm weight 34kg |
£45.00 | £90.00 | |
Magnetic drill pipe clamp 50mm - 200mm capacity |
£13.00 | £26.00 | |
Vacuum base plate for attaching magnetic drills to stainless steel. comes c/w vacuum pump 110 volts |
£17.50 | £35.00 | |
| |
|||
| Workshop type drilling machines on floor pedestal, belt driven for continuous use. | |||
Description |
Day rate | Week rate | |
16mm capacity chuck morse taper 3 240/415 volts |
£33.00 | £66.00 | |
| Drill stand small | £9.00 | £18.00 | |
| |
|||
| Heavy duty pneumatic drills suitable for site drilling of concrete and masonry. A range of drill bits and extension rods are available for sale or to hire. | |||
Description |
Day rate | Week rate | |
CP9 32mm capacity requires 20cfm weight 5kg |
£17.50 | £35.00 | |
CP14 45mm capacity requires 32cfm weight 7kg |
£20.00 |
£40.00 | |
CP32 50mm capacity requires 103 cfm |
£30.00 | £60.00 | |
Carbide inserts 25mm - 32mm |
£9 | ||
Carbide inserts 33mm - 50mm |
£15.00 | ||
Drilling stems per foot |
£3.00 | ||
| |
|||
| A range of non percussion drills for drilling steel and wood | |||
Description |
Day rate | Week rate | |
13mm capacity chuck electric 240/110 volts |
£9.00 | £18.00 | |
20mm capacity 16mm chuck electric 110 volts |
£12.50 | £25.00 | |
32mm capacity morse taper 3 electric 110 volts Double handle breast drill |
£21.00 | £42.00 | |
32mm capacity morse taper 3 electric 110 volts Double handle breast drill c/w slipping clutch |
£27.50 | £55.00 | |
10mm capacity chuck pneumatic requires 21cfm |
£11.00 | £22.00 | |
13mm capacity chuck pneumatic requires 28cfm |
£12.50 | £25.00 | |
32mm capacity morse taper 3 requires 70cfm Double handle, twist throttle, reversible. |
£34.00 | £68.00 | |
50mm capacity morse taper 4 requires 88cfm Double handle, twist throttle, reversible. |
£45.00 | £90.00 | |
| |
|||
| Electric machines, very efficient at drilling concrete and brickwork. They use either SDS Plus for the smaller holes or SDS Max and K taper, for the larger sizes. All the drill bits and cores are available either to hire or purchase. | |||
Description |
Day rate | Week rate | |
24mm capacity SDS Plus 110 volts light duty |
£14.00 | £28.00 | |
24mm capacity SDS Plus 110 volts light duty with integral dust extraction |
£22.50 | £45.00 | |
30mm capacity SDS Plus 110 volts heavy duty |
£18.00 | £36.00 | |
40mm capacity SDS Max 110 volts medium duty 80mm capacity in TCT core drills |
£20.00 | £40.00 | |
40mm capacity SDS Max 110 volts heavy duty 125mm capacity in TCT core drills |
£26.00 | £52.00 | |
|
|||
Description |
Day rate | Week rate | |
Core bits TCT 25mm - 50mm |
£8.00 | ||
Core bits TCT from 50mm per 25mm |
£4.00 | ||
K taper, SDS plus & max drill bits 12mm - 24mm |
£3.00 | £6.00 | |
K taper & SDS max drill bits |
£4.00 | £8.00 | |
|
|||
| A wide selection of high speed morse taper drill bits and reamers. due to wide range and availability of these items, we ask that you telephone us for a price on them. | |||
| |
|||
| Two different types of screwdriver, dry lining with high speed 4000 rpm and depth sensitive noses and torque drivers for TEX screws 2500 rpm with adjustable clutches. Cordless drill drivers can also be used. Magnetic holders, screwdriver bits and nut setters are available to purchase. | |||
Description |
Day rate | Week rate | |
Dry wall type 110 volts |
£14.00 | £28.00 | |
Torque (Tex) type 110 volts |
£14.00 | £28.00 | |
|
|
|||
| Hand held tapping machines upto a capacity of 12mm. These machines have integrated reversing gearboxes with rapid return action. A slipping clutch for blind holes and variable speed trigger. We also have a range of tapping heads on morse taper mounts. The smaller of these can be used in portable morse taper machines, see section 3/10. Whilst the larger ones need either magnetic, pillar or radial arm drills. | |||
Description |
Day rate | Week rate | |
Hand held. Auto reverse 10mm capacity 110 volts |
£20.00 | £40.00 | |
Hand held. Auto reverse 12mm capacity 110 volts |
£27.50 | £55.00 | |
Hand held. Auto reverse 18mm capacity 110 volts |
£44.50 | £89.00 | |
Magnetic. Auto reverse 18mm capacity 110 volts |
£72.50 | £145.00 | |
|
Tapping head auto reverse 18mm capacity M/T 2 |
£27.50 | £55.00 |
Tapping head auto reverse 30mm capacity M/T 3 |
£35.00 | £70.00 | |
Tapping head auto reverse 33mm capacity M/T 4 |
£36.00 | £72.00 | |
Tapping head auto reverse slipping clutch 12mm - 42mm capacity M/T 4 |
£81.00 | £162.00 | |
Tapping head slipping clutch 50mm capacity M/T 5 |
£90.00 | £180.00 | |
| |
|||
| Used for cutting large holes in sheet metal. Variable, from 25mm to 300mm diameter through 25mm thickness material. Very slow speeds are required, please check when ordering, which drilling machine would be suitable. Tool has a morse taper 3 mount. | |||
Description |
Day rate | Week rate | |
Trepanning tool |
£26.50 | £53.00 | |
Cutting tool is a sale item at £24.00 |
|||
Sheffield