Tel: 0114 2753666
Fax: 0114 2754183
Opening Times
Mon -Fri 7:30am - 5pm
Sat: 8:30am - 12noon
 |
 |
 |
 |
 |
| |
1/ AIR HOSES | ||
| Available for hire or for sale, Please ensure that whip check hose connectors are always fitted. | |||
| Description | Day rate | Week rate | |
| Air hose 12” x 14m | £2.50 | £5.00 | |
| Air hose 3/4” x 14m | £4.50 | £9.00 | |
| Air hose 2" x 10m threaded couplers | £12.50 | £25.00 | |
|
2/ AIR MOVERS | ||
| 300mm diameter fans, these reversible units can be used for either blowing air into confined spaces or sucking air out. They come complete with 5m of hose and have a flow rate of 3600 m3/hr | |||
| Description | Day rate | Week rate | |
| Air mover 300mm 110 volts c/w 1 hose | £33.50 | £67.00 | |
| Hose extra 5mt c/w connector | £5.50 | £11.00 | |
| Air mover venturi pneumatic 300mm horn diameter. 40psi 73cfm = 3152cfm air flow. 80psi 124cfm = 4929cfm air flow | £23.50 | £47.00 | |
| 3/ ALUMINIUM ROAD PLATES | |||
| Use these on floor areas to prevent damage to nylon Machinery moving skates | |||
| Description | Day rate | Week rate | |
| 2400mm x 0.600mm | £6.00 | ||
|
4/ BALANCERS TOOL | ||
| These spring balancers, when correctly set can make tools become almost weightless in the hands of the operator, but can still be moved up and down with the minimum of effort. This removes the danger of back strain and increase operator efficiency and production. | |||
| Description | Day rate | Week rate | |
| 2kg - 6kg 1.5m cable | £6.00 | £12.00 | |
| 9kg - 15kg 1.5m cable | £8.50 | £17.00 | |
| 30kg - 40kg 1.5m cable | £16.00 | £32.00 | |
|
5/ BENCHES | ||
| Steel topped work benches complete with engineers vice. Very heavy duty. Ideal for temporary workshops. | |||
| Description | Day rate | Week rate | |
| 1800mm x 750mm | £17.00 | £34.00 | |
|
6/ BOTTLE CAGES | ||
| Suitable for the storage of industrial gases, fully labelled with the regulation safety notices and secured with a heavy duty padlock | |||
| Description | Day rate | Week rate | |
| 1500mm x 1500mm x 600mm | £14.50 | £29.00 | |
| 1800mm x 1700mm x 900mm | £14.50 | £29.00 | |
| 900mm x 1800mm x 600mm Flat pack type | £14.50 | £29.00 | |
|
|
7/ CABLE CRIMPERS | ||
| Hydraulic tools for crimping terminals on to cables | |||
| Description | Day rate | Week rate | |
| Manual lever type 10mm-95mm | £16.00 | £32.00 | |
| Hand lever hydraulic capacity 10mm 400mm | £34.50 | £69.00 | |
| Hydraulic pump type capacity 10mm - 400mm | £39.50 | £79.00 | |
| Hydraulic pump type capacity 185mm - 630mm | £50.00 | £100.00 | |
| |
8/ CABLE CROPPER | ||
| Manual & Hydraulic cutters for copper & aluminium cables | |||
| Description | Day rate | Week rate | |
| Cutter manual shear 30mm capacity | £16.00 | £32.00 | |
| Cutter hydraulic capacity 70mm c/w hyd. pump | £42.00 | £84.00 | |
| 9/ CABLE ROLLERS | |||
| Rubber rollers on flat metal plates make simple work of laying cables | |||
| Description | Day rate | Week rate | |
| Cable roller 140mm | £5.50 | £11.00 | |
| |
10/ CARVER CLAMPS | ||
| Very heavy duty rack clamps for use in the engineering industry. High torque can be obtained without distortion. | |||
| Description | Day rate | Week rate | |
| 150mm - 300mm | £6.50 | £13.00 | |
| 450mm - 600mm | £14.50 | £29.00 | |
| |
11/ CLAMPS | PPE22 | |
| “G” Heavy duty “G” clamps for general use. | |||
| Description | Day rate | Week rate | |
| Clamps 150mm to 300mm | £7.00 | ||
| |
12/ COMPRESSORS | ||
| A range of compressors suitable for powering paint spraying through to Grit Blast pots and heavy duty Breakers. | |||
| Description | Day rate | Week rate | |
| 4cfm 240 volts super quiet | £26.50 | £53.00 | |
| 8cfm 110 volts lightweight 22kg | £25.50 | £51.00 | |
| 8cfm 240 / 110 volts 50lts | £26.50 | £53.00 | |
| 14cfm 240 volts 100 lts | £30.50 | £61.00 | |
| 14cfm 415 volts 3 phase 150 lts | £30.50 | £61.00 | |
|
25cfm 415 volts 3 phase 150 lts | £41.00 | £82.00 |
| 24cfm petrol engine 110 lts | £42.00 | £84.00 | |
| 100cfm diesel engine towable | £50.00 | £100.00 | |
| 250cfm diesel engine towable | £108.00 | £216.00 | |
| 13/ CONDUIT BENDER | |||
| Floor standing manual bender c/w pipe vice and formers | |||
| Description | Day rate | Week rate | |
| 16mm - 25mm c/w all formers | £15.00 | £30.00 | |
| |
14/ CONDUIT STOCKS AND DIES | ||
| Traditional two handed stocks or electric threader for ease of use. Please use cutting compound to avoid damage to the die sets. Cutting compound is available for purchase as a spray can or paste. | |||
| Description | Day rate | Week rate | |
| Hand threader 16mm - 25mm | £19.00 | £38.00 | |
| Portable threader 110 volts 16mm - 32mm | £29.00 | £58.00 | |
|
15/ DRIP TRAYS | ||
| Various sizes of trays available to capture oil spillage from machines. | |||
| Description | Day rate | Week rate | |
| Drip tray metal 3ft x 2ft | £5.50 | £11.00 | |
| Drip tray metal 4ft x 4ft | £8.00 | £16.00 | |
| Sump tray 2 drum size cap 250lt | £10.00 | £20.00 | |
| |
16/ EXTRACTORS / PULLERS | ||
| Hydraulic pulling tools for removing bearings, gears etc. Our kits contain a variety of versions, 2 legs 3 legs, internal and external. | |||
| Description | Day rate | Week rate | |
| 8 tonne pulling capacity twin/triple leg kit min/max jaw width 20mm/250mm max depth 250mm | £45.00 | £90.00 | |
| 12 tonne pulling capacity twin/triple leg kit min/max jaw width 50mm/500mm max depth 280mm. Seperator min/max jaw 50/175mm depth 838mm | £66.50 | £133.00 | |
|
17/ FUME EXTRACTORS | ||
| Portable extractor with inbuilt filters giving 99.9% filtration c/w 3m hose and magnetic nozzle to ensure maximum extraction. | |||
| Description | Day rate | Week rate | |
| Air mover 300mm 110v c/w 5m hose | £33.50 | £67.00 | |
| Hose extra 5mt c/w connector | £5.50 | £11.00 | |
| Suitcase type extractor 110 volts | £30.50 | £61.00 | |
| |
18/ GREASE GUNS | ||
| Pneumatic operated, these guns are ideal for repetitive work. | |||
| Description | Day rate | Week rate | |
| Hand gun 500ml capacity requires 4cfm | £10.50 | £21.00 | |
| Barrel type fits 50kg barrel requires 7cfm | £27.50 | £55.00 | |
|
19/ IMPACT SOCKETS | ||
| From 3/8” square drive to 1 1/2” square drive, these are available either to hire or buy. Please ask for a quote if you require a size not shown | |||
| Description | Day rate | Week rate | |
| 1/2” square drive 8mm - 25mm | £1.50 | £3.00 | |
| 1/2” square drive 26mm - 32mm | £2.50 | £5.00 | |
| 3/4” square drive 18mm - 32mm | £3.50 | £7.00 | |
| 3/4” square drive 33mm - 46mm | £5.00 | £10.00 | |
| 1” square drive 19mm - 42mm | £5.50 | £11.00 | |
| 1” square drive 43mm - 60mm | £8.50 | £17.00 | |
| 1” square drive 65mm - 75mm | £13.00 | £26.00 | |
| 1” square drive 80mm - 90mm | £16.00 | £32.00 | |
| 1” square drive 91mm - | POA | POA | |
| Extension bar 1/2" square drive | £3.00 | £6.00 | |
| Extension bar 3/4" square drive | £5.50 | £11.00 | |
| Extension bar 1" square drive | £8.00 | £16.00 | |
| Universal joint 1/2” | £4.50 | £9.00 | |
| Universal joint 3/4” | £6.00 | £12.00 | |
| Universal joint 1” | £8.00 | £16.00 | |
| |
20/ IMPACT WRENCHES | ||
| Used for untightening nuts and bolts. Can also be used for tightening nuts and bolts but care should be taken as the speed of the machine means that the correct torque can be hit and over tightened very quickly. If you are in doubt please ask for advise on the correct size machine to use. | |||
| Description | Day rate | Week rate | |
| 1/2” square drive 110 volts 12mm - 20mm bolt capacity. 294Nm torque | £14.50 | £29.00 | |
| 3/4” square drive 110 volts 16mm - 22mm bolt capacity. 588Nm torque | £18.00 | £36.00 | |
| 1” square drive 110 volts 18mm - 30mm bolt capacity 700Nm torque | £24.50 | £49.00 | |
|
1/2” square drive pneumatic requires 16cfm 12mm - 22mm bolt capacity 350Nm torque | £15.00 | £30.00 |
| 3/4” square drive pneumatic requires 20cfm 16mm - 27mm bolt capacity 725Nm | £18.00 | £36.00 | |
| 1” square drive pneumatic requires 25cfm 24mm - 39mm bolt capacity 2000Nm torque | £23.50 | £47.00 | |
| 1” square drive petrol 2 stroke 22mm - 30mm bolt capacity 1360Nm torque | £29.00 | £58.00 | |
|
1 1/2” square drive back handle pneumatic requires 84cfm 36mm - 45mm bolt capacity 4000Nm torque | £55.50 | £111.00 |
| 1 1/2” square drive double handle pneumatic requires 64cfm 36-52mm bolt capacity 6600 torque | £58.00 | £116.00 | |
| 1/2” square drive angle head pneumatic requires 9cfm 6mm bolt capacity 145Nm torque | £21.00 | £42.00 | |
| 1” square drive angle head pneumatic requires 25cfm 24mm - 38mm bolt capacity 1000Nm torque | £47.50 | £95.00 | |
| |
21/ MACHINERY MOVING SKATES | ||
| Available in two different types. Metal caterpillar tracks for uneven surfaces, these can be supplied with turntables and steering handles. The nylon wheels skates are for finished surfaces and come complete with a front steering skate. If there are metal turnings or uneven surfaces where these are to be used then aluminium road plates are available to hire to prevent damage to the wheels. | |||
| Description | Day rate | Week rate | |
| Metal caterpillar skates (set of 4) 20 ton | £20.00 | ||
| Turntable and handle set | £11.00 | ||
| Nylon skates (set of 3) 20 ton | £132.00 | ||
| Metal caterpillar skates (set of 4) 50 tonne | £55.00 | ||
| Turntable and handle for 50 tonne | £35.00 | ||
| Aluminium road plates 2.4m x 0.6m for skates | £7.00 | ||
|
22/ MANIFOLD PNEUMATIC 4 WAY 3/4” | ||
| Distribution manifold to allow four outlets to be used off one inlet. Both inlet and outlets are 3/4” claws | |||
| Description | Day rate | Week rate | |
| Manifold pneumatic 4 way 3/4” | £9.00 | £18.00 | |
 |
23/ NUT RIVETER | ||
| Rivets captive nuts into thin sheet metal. The nut inserts are available to purchase | |||
| Description | Day rate | Week rate | |
| Nut insert kit 4mm to 10mm nuts | £9.00 | £18.00 | |
| |
24/ NUT SPLITTERS | ||
| These hydraulically operated splitters will remove seized nuts without damaging the threads | |||
| Description | Day rate | Week rate | |
| 33mm nut capacity integral grease type pump | £6.00 | £12.00 | |
| 50mm nut capacity (requires hydraulic pump) | £51.50 | £103.00 | |
| Hydraulic pump to suit | £21.00 | ||
|
25/ OILERS | ||
| In line oil reservoir for use with pneumatic airlines. Fitted with 3/4” claws on each end, these have adjustable feed screws to allow a small drip of airline oil to feed into the line. This ensures that the tool is constantly lubricated. Prevents rusting and wear. Air line oil sold separately. | |||
| Description | Day rate | Week rate | |
| Inline oiler | £5.00 | £10.00 | |
| Airline oil sold seperately | |||
| Water trap | £6.50 | £13.00 | |
| |
26/ OXY - ACETYLENE/PROPANE | ||
| A range of Cutting, Braising and Welding sets. Available complete with 15m hoses, flash backs, regulators either plugged or with gauges. Acetylene or Propane, any size and kind of bottle can be hired. | |||
| Description | Day rate | Week rate | |
| Braising / welding set c/w 6 nozzles | £23.50 | £47.00 | |
| Burning set | £23.50 | £47.00 | |
| Straight line burner 240 / 110 volts | £33.00 | £66.00 | |
| Track to suit straight line burner ( per 2m length ) | £5.50 | £11.00 | |
| Bottle trolleys oxy - acet and oxy - prop. | £5.50 | £11.00 | |
| Pipe cutting 114mm - 600mm oxy - acet / propane | £39.50 | £79.00 | |
| |
27/ PLASMA CUTTER | ||
| High performance portable Plasma cutting system. Upto 22mm severance capacity, requires 6cfm air supply. Torch electrodes and nozzles are sold as consumables. | |||
| Description | Day rate | Week rate | |
| Cebora 110/240v 8mm steel severance 10mm | £37.50 | £75.00 | |
| Powermax 600 3ph 415 volts 16mm mild steel | £55.00 | £110.00 | |
| |
28/ PRESS HYDRAULIC | ||
| This frame press can be used for assembly and disassembly of parts, bearings etc. | |||
| Description | Day rate | Week rate | |
| 10 ton press floor standing model c/w pump | £43.50 | £87.00 | |
|
29/ RATCHETS | ||
| for use with sockets, makes for speedy tightening and untightening in confined areas. | |||
| Description | Day rate | Week rate | |
| Hand 1/2” square drive | £4.50 | £9.00 | |
| Hand 3/4” square drive | £5.50 | £11.00 | |
| Hand 1” square drive | £10.50 | £21.00 | |
| |
30/ RIVETERS | ||
| A comprehensive range of tools to suit every job. From small fabrication projects to full scale production. heavy duty, light duty and fencing. hand air and electric operated. | |||
| Description | Day rate | Week rate | |
| Hand pliers capacity 1/8” - 3/16” Pop rivets | £5.00 | £11.00 | |
| Hand lazy tong capacity 1/8” - 3/16” Pop rivets | £8.50 | £18.00 | |
| Hand long handle capacity 1/8” - 3/16” Pop rivets | £8.50 | £18.00 | |
| Electric 240/110v capacity 1/8” - 3/16” Pop rivets | £11.00 | £24.00 | |
|
Pneumatic capacity 1/8” - 3/16” Pop rivets Requires 8cfm | £13.00 | £28.00 |
| Pneumatic capacity 1/8" - 1/4" pop rivets steel and aluminium requires 8cfm | £18.00 | £36.00 | |
| Pneumatic capacity 3/16” - 1/4” Pop rivets, Magnabolts, Monobolts requires 10cfm | £25.50 | £51.00 | |
| Nutsert pliers thin sheet, capacity 4mm - 10mm | £9.50 | £19.00 | |
| Fencing tool for Hookbolts pneumatic requires 10cfm | £26.50 | £53.00 | |
| |
31/ RIVET BUSTER | ||
| Heavy duty slow action pneumatic hammer for the removal of hot rivet heads. When fitted with punches will also knock out the rivet stem. | |||
| Description | Day rate | Week rate | |
| Rivet buster pneumatic requires 36cfm A reforge charge applies to chisels, Punches are sold. |
£34.00 | £68.00 | |
| 32/ RIVETING HAMMER | |||
| Similar to the busters, these hammers take shaped “snap ends” to form the hot rivet head. A “ Back snap “ pneumatic jack is available to hold the rivet in from the rear. | |||
| Description | Day rate | Week rate | |
| Rivetting hammer, pneumatic capacity upto 1 3/8” requires 36cfm | £34.00 | £68.00 | |
| Back snap, requires 20cfm | £12.00 | £24.00 | |
|
33/ SPANNERS | ||
| A comprehensive range of engineering spanners. Flogging spanners for use with hammers for stubborn nuts, Podgers for aligning holes, large size flat and combination spanners for the odd job. | |||
| Description | Day rate | Week rate | |
| Flogging spanners 19mm - 40mm | £5.50 | £11.00 | |
| Flogging Spanners 41mm - 75mm | £8.00 | £16.00 | |
| Flogging spanners 76mm - 100mm | £10.50 | £21.00 | |
| Podger spanners 17mm - 36mm | £5.50 | £11.00 | |
| Podger spanners 38mm - 65mm | £10.50 | £21.00 | |
| Flat and Combination spanners upto 50mm | £5.50 | £11.00 | |
| |
34/ STRAPPING TOOLS | ||
| Tensioning and sealing tools for polypropylene and metal strapping, strapping and clips are available for sale. | |||
| Description | Day rate | Week rate | |
| Polypropylene tool and sealing tool 13mm cap. | £12.00 | £24.00 | |
| Steel tool and sealing tool up to 19mm capacity | £14.00 | £28.00 | |
| dispensing trolley for steel strapping | £6.00 | £12.00 | |
|
35/ TEE BAR | ||
| Use with sockets in place of a ratchet. | |||
| Description | Day rate | Week rate | |
| Tee bar 3/4” square drive | £6.50 | £13.00 | |
| Tee bar 1” square drive | £10.50 | £21.00 | |
| |
36/ THERMO-HEAT GUN | ||
| Electric heat gun for welding and sealing plastic flooring etc. 2000 degrees. Specific end tools available for sale. | |||
| Description | Day rate | Week rate | |
| Thermoheat gun 110 volts 2000 degrees. | £18.00 | £36.00 | |
| |
37/ TORQUE MULTIPLIER | ||
| Used in conjunction with torque wrenches Torque multipliers increase the torque that can be applied by the operator. Because the power output cannot exceed the the power input, the output revolutions will be lower than the input revolutions (Torque x rpm = power) Ensuring that the reaction arm is stationary, the output torque will increase by the factor ratio x input torque. | |||
| Description | Day rate | Week rate | |
| 1700nm 5 - 1 ratio 1/2” input 3/4” output | £19.50 | £39.00 | |
| 1700nm 5 - 1 ratio 3/4” input 1” output | £19.50 | £39.00 | |
| 3000nm 10.5 - 1 ratio 1/2” input 1” output | £31.50 | £63.00 | |
| 3400nm 25 - 1 ratio 1/2” input 1 1/2” output | £45.00 | £90.00 | |
| 6000nm 25 - 1 ratio 1/2 input 1 1/2” output | £84.00 | £168.00 | |
| |
38/ TORQUE WRENCHES | ||
| Selecting the correct model will allow the the tightening of bolts to a preset value. Conversion = Pounds force feet x 1.356 = Newton metres |
|||
| Description | Day rate | Week rate | |
| 1/2” square drive 8 - 54Nm | £9.50 | £19.00 | |
| 1/2” square drive 40 - 280Nm | £9.50 | £19.00 | |
| 1/2” square drive 70 - 330Nm | £9.50 | £19.00 | |
|
3/4” square drive 140 - 560Nm | £12.00 | £24.00 |
| 3/4” square drive 700 - 1500Nm | £26.50 | £52.00 | |
| 1” square drive 480 - 940Nm | £26.50 | £52.00 | |
| 1” square drive 500 - 1000Nm | £26.50 | £52.00 | |
|
|
39/ WELDERS DIESEL/PETROL | ||
| Petrol engined units are lightweight. Diesel engined units are more economical to run and are available in super silenced versions with electric start. All units come complete with 50ft leads and full fuel tanks (fuel chargeable). | |||
| Description | Day rate | Week rate | |
| 140amp petrol pull start 110 volt p/take off | £27.50 | £55.00 | |
| 150amp magiweld petrol pull start 110v p/take off | £42.50 | £85.00 | |
| 200amp petrol pull start 110/240 volt p/take off | £42.00 | £84.00 | |
| 200amp diesel electric start 110/240 volt p/take off | £47.50 | £95.00 | |
| 200amp diesel electric start super silenced 110/240 volt p/take off. | £54.00 | £108.00 | |
| 300amp diesel electric start super silenced 110 volt p/ take off. | £68.50 | £137.00 | |
| Remote control to suit 300 amp units | £5.50 | £11.00 | |
| Earth rods and straps | £3.00 | £6.00 | |
| Mig set top boxes, see Mig welder | |||
| Tig set top boxes see Tig welders | |||
| |
40/ WELDERS MIG | ||
| Suitable for continuous welding steel, stainless or aluminium, with either remote or integral wire feeds to take 5kg or 15kg spools. Gas and wire supplied as sale items. | |||
| Description | Day rate | Week rate | |
| 130 amp 240 volt, will use both gasless wire and gas cartridges. Wire size 0.6 - 0.8mm | £22.50 | £45.00 | |
| 300 amp 240 volt, integral wire feed. Wire size 0.6 - 1.2mm | £42.00 | £84.00 | |
| 350 amp 415 volts 3 phase integral wire feed. Wire size 0.6 - 1.2mm | £47.50 | £95.00 | |
| 400 amp 415 volts 3 phase remote wire feed. Wire size 0.6 - 1.2mm | £50.00 | £100.00 | |
| Mig wire feeder to convert MMA Diesel welders | £42.50 | £85.00 | |
| |
41/ WELDING OVENS & QUIVERS | ||
| Static drying oven for for electrodes.Thermostatically controlled upto 400ºC Quivers are portable, with a temperature of 100ºC keeping a full pack of electrodes ready for use. | |||
| Description | Day rate | Week rate | |
| Oven 400deg Centigrade 240 volts | £42.00 | £84.00 | |
| Quivers 110 / 240 volts | £6.00 | £12.00 | |
 |
42/ WELDING SCREENS | ||
| Collapsible screens to shield the work area from arc flashes. | |||
| Description | Day rate | Week rate | |
| Welding screen c/w frame 1.45m x 2m | £12.00 | £24.00 | |
| 42.5/ WELDER SPOT | |||
| Description | Day rate | Week rate | |
| Spot welder 240v 13kw 2mm + 2mm capacity | £26.50 | £53.00 | |
| |
43/ WELDERS TIG | ||
| Units come complete with torch, 50ft earth lead and gas regulator Consumables are charged extra including gas | |||
| Description | Day rate | Week rate | |
| 140 amp Inverter 110 / 240 volt DC scratch start | £22.50 | £45.00 | |
| 160 amp inverter 110/240 volt DC high frequency | £55.50 | £111.00 | |
| 160 amp inverter 240 volt AC/DC high frequency | £58.00 | £116.00 | |
| 200 amp 415 volt AC / DC high frequency | £58.00 | £116.00 | |
| 300 amp high frequency unit. To convert DC MMA welders to TIG | £30.50 | £61.00 | |
| |
44/ WELDING TRANSFORMERS | ||
| Standard MMA welders where mains 240 or 415 volts is available. Either oil cooled or air cooled, these welders offer continuous rating. 110 volt units are also available, suitable only for light duty work. All come complete with 50ft welding leads | |||
| Description | Day rate | Week rate | |
| 140 amp air cooled 110 / 240 volts | £14.00 | £28.00 | |
| 180 amp air cooled 240 volts | £16.00 | £32.00 | |
| 300 amp DC air cooled 415 volts | £29.00 | £58.00 | |
| 180 amp oil cooled 240 volts | £18.50 | £37.00 | |
| 45/ WELDING EXTENSION LEADS | |||
| Description | Day rate | Week rate | |
| Extension welding cables 50mm 50ft long each | £5.50 | £11.00 | |
Sheffield