| Hole punch systems alfra hire, plate bevellers, nibblers, bandsaws and recip saws plus more for hire sheffield |
10/ Metal Cutting |
 |
1/ BANDSAWS |
|
| For fast accurate cutting of metal, the band saws cannot be beaten. Hire rate includes one blade. Spare blades are available on a sale or return basis. |
| Description |
Day rate |
Week rate |
| Horizontal hand held or fitted to a stand. Either bench or floor mounted. integrated vice, 110 volts 90mm capacity. |
£33.00 |
£66.00 |
Vertical floor standing. Flat bed, 150mm capacity,
300mm throat 240 volts |
£41.00 |
£82.00 |
| Horizontal, integral vice 260mm capacity 415 volts |
£67.50 |
£135.00 |
| |
|
|
 |
2/ CIRCULAR SAW TCT |
|
| disposable blade, hand held portable saw. This saw will cut upto 6mm steel plate with a cutting depth of 55mm, eliminates most of the sparks and comes with an integral chip collector. Blades are sold as consumables |
| Description |
Day rate |
Week rate |
| Circular saw 180mm 1200 watts 110 volts |
£16.00 |
£32.00 |
| Circular saw 230mm watts 110 volts |
£27.50 |
£55.00 |
| |
|
|
 |
3/ CUT OFF SAW |
|
| Portable abrasive wheel saw. 350mm blade. 115mm cutting capacity, 45 deg. mitre vice. Blades are sold as consumables. |
| Description |
Day rate |
Week rate |
| Cut off saw 350mm 2300 watts 110 volts |
£21.00 |
£42.00 |
| |
|
|
 |
4/ TCT CUT OFF SAW |
|
| Portable 350mm saw. The TCT blade is quicker and more accurate than the abrasive blade type. Almost without sparks and burrs 115mm cutting capacity 45 deg. mitre vice. A resharp charge applies. |
| Description |
Day rate |
Week rate |
| TCT cut off saw 350mm 2300 watts 110 volts |
£31.50 |
£63.00 |
| Resharp charge - £10.00 |
|
|
| |
|
|
 |
5/ FILE POWERED |
|
| This pneumatic reciprocating file takes needle files of any shape |
| Description |
Day rate |
Week rate |
| Reciprocating needle file Pneumatic req. 4 cfm |
£5.50 |
£11.00 |
| |
|
|
 |
6/ HACKSAW POWERED |
|
| Electric hacksaw's floor or bench mounted. Hire rate includes one blade |
| Description |
Day rate |
Week rate |
| Bench type 300mm blade 50mm cap. 240 volts |
£10.50 |
£21.00 |
| Trolley type 300mm blade 100mm cap. 240 volts |
£13.00 |
£26.00 |
| Trolley type 450mm blade 150mm cap. 110 volts |
£26.50 |
£53.00 |
| |
|
|
 |
7/ HOLE PUNCHES |
|
| Hydraulic operated, hole punching machines. These will punch up to 25mm diameter holes through 16mm mild steel plate in seconds, vastly reducing the normal time taken to drill or broach. |
| Description |
Day rate |
Week rate |
| APS 60 capacity 18mm through 10mm 110 volts |
£62.50 |
£125.00 |
| APS 70 capacity 22mm through 13mm 110 volts Oblong holes 22mm x 14mm through 13mm |
£62.50 |
£125.00 |
| APS 120 capacity 25mm through 16mm 110 volts Oblong holes 25mm x 18mm through 16mm |
£62.50 |
£125.00 |
Sheet metal hole punch set 12.7mm - 54mm
through 2mm mild steel. Manual hydraulic pump. |
£42.00 |
£84.00 |
| |
|
|
 |
8/ JIGSAWS |
|
| Versatile saws for cutting wood and metal in either straight lines or curves. A wide range of blades are available for sale |
| Description |
Day rate |
Week rate |
| Jigsaw 240 / 110 volts capacity in wood 65mm, metal 10mm |
£10.00 |
£20.00 |
 |
Jigsaw Pneumatic requires 28 cfm Capacity in wood 65mm, metal 10mm |
£12.00 |
£24.00 |
| Jigsaw heavy duty 110 volts integral coolant tank Capacity in wood 100mm, metal 25mm |
£25.00 |
£50.00 |
| |
|
|
 |
9/ NIBBLERS |
|
| Suitable for straight lines and curves in metal up to 10mm thickness and in corrugated sheets. |
| Description |
Day rate |
Week rate |
| Nibbler 1mm capacity cordless 12 volts |
£17.00 |
£34.00 |
| Nibbler 1.2mm capacity 240 / 110 volts |
£14.00 |
£28.00 |
| Nibbler 2mm capacity 240 / 110 volts |
£17.00 |
£34.00 |
 |
Nibbler 3.5mm capacity 240 / 110 volts |
£20.00 |
£40.00 |
| Nibbler 6mm capacity 110 volts |
£45.00 |
£90.00 |
| Nibbler 8mm capacity 110 volts |
£85.00 |
£170.00 |
| Nibbler 10mm capacity 110 volts |
£85.00 |
£170.00 |
| |
|
|
| |
9.5/ Pipe Milling Machine |
| Used for cutting cast iron, steel and plastic pipes. Can produce straight cuts and bevel cuts. Cutting capacity is 250mm and 3000mm. Maximum cutting depth is 45mm for straight cuts and 35mm for bevel cuts. Air consumption 71cfm. |
| Description |
Day rate |
Week rate |
| Pipe miller c/w cooling system and maintenance unit |
|
£500 |
| Bevelling and cutting blades |
POA |
POA |
| |
|
|
 |
10/ PLATE BEVELLER |
|
| Commonly referred to as Weld Prep or chamfering machines.
These environmentally friendly machines produce no gases, sparks or fumes. Uniform, oxide free metallically clean K, Vee, X and Y joints can be prepared quickly and accurately. They can be used vertically, horizontally or fixed on to a stand. Working speed 1 - 2m per minute The Rotating TCT insert machine, although not a production machine will work on any plate thickness, has an infinitely variable angle between 20 deg. and 60 deg. The chamfer produced has a architectural finish, suitable for show as well as for welding. |
| Description |
Day rate |
Week rate |
| Trumpf TKF1500 40mm plate capacity 110 volts. Max. length of bevel 15mm The head has variable angles 20 to 45 degrees |
£61.00 |
£122.00 |
| Trumph TKF1500 PLUS This is the machine to use on stainless steel having a two speed gearbox and with the same capacity as the TKF1500. The low speed is used for stainless and the high speed for mild steel |
£72.50 |
£145.00 |
 |
Stand, floor mounting to suit TKF100 & 1500 |
£6.00 |
£12.00 |
| Punch mild steel sold as as consumable |
|
|
| Punch stainless steel sold as a consumable |
|
|
| Rotating TCT insert Beveller 110 volt |
£55.00 |
£110.00 |
| TCT inserts sold as a consumable |
|
|
| |
|
|
 |
11/ SAWS PORTABLE |
|
| These saws are specifically designed to cut mild steel plate, aluminium and plastics upto 6mm with a total depth of cut of 55mm c/w chip collector |
| Description |
Day rate |
Week rate |
| Dry cut TCT portable saw 110v 180mm |
£16.00 |
£32.00 |
| Dry cut TCT portable saw 110v 230mm |
£27.50 |
£55.00 |
| TCT blade sold as a consumable |
|
|
 |
12/ SAWS RECIPROCATING |
|
| Will cut at 90 degrees with the use of a chain clamp. Through mild & Stainless steel, Non ferrous and plastics. Capacities up to 300mm. Pipe, channel, box and angle sections. |
| Description |
Day rate |
Week rate |
Recip. saw cordless 18 volt. c/w 2 batteries
Clamp will not fit this machine free hand use only |
£22.00 |
£44.00 |
| Recip. saw 150mm capacity c/w clamp 110 volt |
£22.50 |
£45.00 |
 |
Recip. saw 300mm capacity c/w clamp 110 volt |
£40.00 |
£80.00 |
Recip. saw 300mm capacity c/w clamp.
Pneumatic requires 35cfm |
£40.00 |
£80.00 |
| |
|
|
 |
13/ SHEARS |
|
| The scissor type action of these machines produces a clean swarf free cut in mild steel upto 3.2mm |
| Description |
Day rate |
Week rate |
| Shear 1.0mm straight line 12 volts |
£17.00 |
£34.00 |
| Shear 1.6mm capacity 240/110 volts |
£14.50 |
£29.00 |
| Shear 2.8mm capacity 110 volts |
£17.50 |
£35.00 |
 |
Shear 3.2mm capacity 110 volts |
£20.00 |
£40.00 |
| Hand lever type on stand or bench mounting capacity 6.5mm x 200mm |
£22.50 |
£45.00 |
|
|
|