| Hydraulic pipe bender Electric Tubela hire, pipe bevellers, mapress, roll groovers, milling machine fein, pipe cutting machine, 6" pipe threaders and pressure test buckets plus all your pipework requirements for hire sheffield. Whatever pressure you are wanting to test your pipework too, we will have the item. On manual systems we have pressure test buckets that go as high as 700bar and pneumatic pressure test buckets that go upto 1080bar. If you are wanting to bend steam pipe or hydraulic thick wall pipe we have the hydraulic pipe bender to do the task. Upto 3" on hydraulic manual systems and upto 2" on electric 110v hydraulic pipe bender system. | ||||
| Photo | Description | Daily Rate | Weekly Rate | Info |
| Call us if you require any further information | ||||
 |
1/ Central Heating Flushing Machine | |||
| Central heating flushing machine has a powerful electric pump for fast filling, flushing and venting of closed systems. Ideal for underfloor solar heating and ground source systems. | ||||
| Central Heating Flushing Machine 110v complete with two filter bags | £42.50 | £85.00 |  |
|
 |
2/ Handrail Dimpling Tool | |||
| Lever action tool used to form the indentations on hand rail fittings to secure them onto the tube. | ||||
| Hand rail dimpling tool | £17.00 | £34.00 | ||
 |
3/ Pipe Barrow | |||
| 2 Wheel barrow allows pipe upto 350mm diameter to be moved with ease. | ||||
| Pipe barrow 2 wheel | £10.00 | £20.00 | ||
 |
4/ Pipe Benders | |||
| A range of pipe benders to suit any and every pipe from 3/16” mild steel and copper to 3” steam pipe. Thick wall Hydraulic pipe formers are available at extra cost as below. Please specify O/D | ||||
| Mini bender one hand ratchet 6 to 10mm | £11.00 | £22.00 | ||
| Level bender 10mm - 18mm vice fixing | £15.00 | £30.00 | ||
| Conduit bender 16mm to 32mm c/w formers & vice floor standing | £16.00 | £32.00 | ||
 |
||||
| Copper tube level bender 15mm 22mm | £11.00 | £22.00 | ||
| Copper tube 12mm to 42mm O/D. Stainless thin wall BS4127, 12mm to 35mm O/D c/w formers,guides and vice. Floor standing | £18.00 | £36.00 | ||
| Ratchet tube bender (horizontal) for Copper and thin wall steel and stainless steel, on tripod 15mm to 54mm c/w formers and guides | £30.00 | £60.00 | |
|
| Mild Steel steam and gas pipe 1/2 to 2” manual hydraulic pump c/w all formers | £30.00 | £60.00 | |
|
| Mild steel steam and gas pipe 1/2” to 3” manual hydraulic pump c/w all formers | £45.00 | £90.00 | |
|
 |
||||
| Mild steel steam and gas pipe 1/2” to 2” Electric hydraulic pump 110 volts c/w all formers | £60.00 | £120.00 | |
|
| Mild steel steam and gas pipe 1/2" to 4" Electric 415v hydraulic pump complete with all formers | £120.00 | £240.00 | |
|
| Flat bar bending attachment to suit either manual or electric pump. Maximum capacity 100mm x 12mm to 90 degrees | £7.00 | £14.00 | ||
| Hydraulic thick wall pipe formers 16mm to 64mm | £7.00 | £14.00 | ||
 |
5/ Pipe Beveller | |||
| This ingenious attachment will fit the Trumpf plate beveller and allows the bevelling of mild steel pipe with a minimum diameter of 80mm upwards. The cutting punches are sold as consumables. | ||||
| Attachment c/w beveller 110 volts | £72.50 | £145.00 | ||
|
6/ Pipe Cutters | |||
| Quick and accurate cutting of all types of pipes and tubes | ||||
| Pipe Cutting Machine, REMS Cento 110v upto 110mm | £40.00 | £80.00 | |
|
| Copper tube 1/4” to 2” | £6.00 | £12.00 | ||
| Steel pipe 1/2” to 2” single cutting wheel | £6.00 | £12.00 | ||
| Steel pipe 2” to 4” single cutting wheel | £9.00 | £18.00 | ||
| Steel pipe 2” to 4” triple cutting wheel | £11.00 | £22.00 | ||
 |
||||
| Steel pipe 2” to 6” 4 wheel hinged type | £16.00 | £32.00 | ||
| Steel pipe 4” to 24” multi cutting wheel | £30.00 | £60.00 | ||
| Crack cutter 2” to 12” Suitable for cast, Clay, Cement pipes etc. | £30.00 | £60.00 | ||
| Pipe cutting machine 114mm - 600mm capacity oxy/ acet - propane | £42.50 | £95.00 | ||
 |
7/ Pipe Freezing | |||
| We can offer two different types of freezing kits. The most portable self contained unit is powerd by electric. The more heavy duty machine operates on special CO2 gas bottles. | ||||
| Electric pipe freezer 110 volts 15mm to 42mm | £31.00 | £62.00 | |
|
| Electric pipe freezer 110 volts 10mm to 60mm | £37.50 | £75.00 | |
|
| Gas pipe freezer 1/2” to 2” Gas is charged extra as a consumable | £17.00 | £34.00 | ||
|
8/ Pipe Jointing Tool | |||
| Electro hydraulic tool for pressure jointing copper & stainless tube with Yorkshire Pressfit / Mannesman fittings and composite plastic tube with the Mepla system | ||||
| Mapress 110volt tool 15mm-35mm jaws | £120.00 | |
||
| Mepla 110volt tool 15mm-35mm jaws | £120.00 | |
||
| Cordless tool 15mm-35mm jaws (108mm capacity) | £120.00 | |
||
| Jaws for 42 - 54mm diameter | £48.00 | |
||
| Jaws for 67 - 108mm diameter | £101.00 | |
||
 |
9/ Pipe Milling Machine | |||
| Their applications range from trimming pipes before laying to cutting pipes already lowered into the ground. Whether cast or steel pipes for oil, gas or water as used for pipelines in municipal supply networks, power plants, and industrial systems as well as for container construction | ||||
| Pipe Milling Machine Pneumatic 250mm - 3000mm | £500.00 | |||
| maximum cutting depth 45mm straight, 35mm bevel cuts | ||||
 |
||||
| Feed rate 80mm per min, air consumption 71cfm | ||||
| Complete with cooling system and maintenance unit | £101.00 | |||
| Beveling and Cutting Blades are for sale only | POA | |||
 |
10/ Pipe Roll Groovers | |||
| Ridgid 916 groover is a lightweight unit suitable for use with the Ridgid 300 threading unit. Please confirm pipe size and type to ensure that it is supplied with the correct rollers. | ||||
| Manual 1” to 6” capacity. Requires Ridgid 300 power unit | £30.00 | £60.00 | |
|
| Powered 1" to 12" capacity. Requires Ridgid 300 power unit | £62.50 | £125.00 | |
|
| Roller sets 8" to 12" for above | £15.00 | £30.00 | |
|
 |
11/ Pipe Saws | |||
| Reciprocating saws that take heavy duty blades and cut tubes and pipes accurately at 90 degrees. All these saws come with a suitable pipe clamp. A wide variety of blades are available as consumables. Blade life can be extended by using a cutting agent sold either as spray cans or tins of paste | ||||
| Electric saw 110 volts 12mm to 100mm capacity | £22.50 | £45.00 | ||
| Electric saw 110 volts 50mm to 300mm capacity | £40.00 | £80.00 | ||
| Pneumatic. 50mm to 300mm capacity req. 35cfm | £40.00 | £80.00 | ||
 |
12/ Pipe Threading | |||
| Electric and manual, floor mounted or hand held. Big ones and small ones. Pipe threading, Nipple threading, Conduit threading, Capacities from 1/8” to 6”. We really are the experts | ||||
| Conduit threader ratchet type 16mm to 32mm | £20.00 | £40.00 | |
|
| Conduit threader portable electric 110 volts capacity 16mm to 32mm | £30.50 | £61.00 | |
|
| Hand ratchet BSPT 1/2” to 2” c/w all dies | £14.00 | £28.00 | ||
| Hand ratchet BSPT 2 1/4” to 3” c/w dies | £29.00 | £58.00 | ||
 |
||||
| Hand held electric threader 110 volts BSPT 1/2” to 2” c/w all dies | £30.50 | £61.00 | |
|
| Ridgid 300 threader on tripod 110 volts 1/2” to 2” c/w pipe stand, diehead, dies, oil gun & bucket | £35.00 | £70.00 | |
|
| Ridgid 1233 pipe threader 110volts 1/4" - 3" c/w pipe stand, dieheads, dies & integral oiler | £49.25 | £98.50 | |
|
| Ridgid 1224 threader 110 volts 1/4” - 4” 2 speed c/w pipe stand, dieheads, dies & integral oiler. | £70.00 | £140.00 | |
|
 |
||||
| Extra diehead for Ridgid | £13.50 | £27.00 | ||
| Bolt diehead & one set of bolt dies for Ridgid | £13.50 | £27.00 | ||
| NPT diehead 1/2" tp 2" Ridgid 300 | £16.00 | £32.00 | ||
| Bolt and die set | POA | POA | ||
| Gold dies for stainless 1/2” to 3/4” or 1” to 2” | £6.00 | £12.00 | ||
 |
||||
| Nipple chuck for use in Ridgid 300 | £6.00 | £12.00 | |
|
| Geared diehead receder for Ridgid 300 2 1/2” to 4” BSPT thread | £22.00 | £44.00 | |
|
| Geared diehead receder for Ridgid 300 2 1/2” to 4” NPT tread | £33.00 | £66.00 | |
|
| Geared diehead receder for Ridgid 4 1/2” to 6” BSPT thread | £87.50 | £175.00 | |
|
 |
13/ Pipe Vices | |||
| Stands c/w either chain or yoke type vice are an essential support tool for pipe cutting and threading etc. | ||||
| Chain vice 12mm to 100mm capacity on tristand | £14.00 | £28.00 | ||
| Yoke vice 3mm to 50mm capacity on folding stand | £9.00 | £18.00 | ||
| Pipe welding vice 1/2" - 8" Straight No 461 | £11.00 | £22.00 | ||
| Pipe welding vice 1/2" - 12" Angle No 462 | £14.00 | £28.00 | ||
 |
14/ Pipe Vices | |||
| Straight and offset, steel and aluminium stillsons. Chain wrenches for the really stubborn threads these have a self tightening action. | ||||
| Stillsons 12” to 18” | £7.00 | £14.00 | ||
| Stillsons 24” to 36” | £10.00 | £20.00 | ||
| Stillsons 48” | £18.00 | £36.00 | ||
 |
||||
| Off set stillsons 24” aluminium | £12.00 | £24.00 | ||
| Chain wrench 12” to 18” | £7.50 | £15.00 | ||
| Chain wrench 24” to 36” | £10.00 | £20.00 | ||
 |
15/ Pressure Test Bucket | |||
| Manual and electric pumps for pressure testing for leaks after the installation of water systems. | ||||
| 50 bar manual pump bucket | £16.00 | £32.00 | |
|
| 100 bar manual pump bucket | £22.00 | £44.00 | |
|
| 700 bar manual pump bucket | £62.50 | £125.00 | |
|
| 100 bar electric 110 volts | £34.50 | £68.00 | |
|
| 1080 bar pneumatic pump requires 4cfm | £72.50 | £145.00 | |
|
 |
15/ Tee Forming Tool | |||
| Branch Tee forming in to copper pipes. These tools will form a Tee branch in any size copper tube from 15mm upwards. The larger the host tube the more financial the benefit against using Tee joints Can be operated with a hand ratchet or with a high torque, variable speed reversible drill. | ||||
| TEE forming set 15mm to 28mm c/w ratchet | £30.00 | £60.00 | ||
 |
15/ Tube Expanding Tool | |||
| Two very different types of expanders come in to this heading. The hand ratchet type is for forming the ends of copper pipe into sleeves for soldered joints without the use of separate jointing pieces. The Pneumatic tube expander is primarily used for for sleaving tubes into plate ends as in heat exchanges, to avoid welding | ||||
| Copper tube hand ratchet 15 - 22mm | £12.00 | £24.00 | |
|
| Tube expander pneumatic | £35.00 | £70.00 | |
|
| Mandrill, various sizes | £10.00 | £20.00 | |
|
Nationwide Delivery
- Tel: 0114 2753666
- Fax: 0114 2754183
