| Our torque multipliers are all precision made Norbar products. All the multipliers work on a by a ratio making it easy to calculate actual torque. Whereever you need any of our torque equipment it can be sent nationwide. With the large range of Torque wrenches it may not be necessary to hire a multiplier as we have torque wrenches that will go upto 1700NM. But if you do need to go higher we have multipliers that will go as high as 9000NM. If you need impact sockets or podger and flogging spanners they can also be provided. | ||||
| Photo | Description | Daily Rate | Weekly Rate | Info |
| Call us if you require any further information | ||||
 |
1/ Impact Sockets | |||
| From 3/8” square drive to 1 1/2” square drive, these are available either to hire or buy. Please ask for a quote if you require a size not shown | ||||
| 1/2” square drive 8mm - 25mm | £1.50 | £3.00 |  |
|
| 1/2” square drive 26mm - 32mm | £2.50 | £5.00 | |
|
| 3/4” square drive 18mm - 32mm | £4.00 | £8.00 | |
|
| 3/4” square drive 33mm - 46mm | £5.50 | £11.00 | |
|
| 1” square drive 19mm - 42mm | £6.00 | £12.00 | |
|
| 1” square drive 43mm - 60mm | £10.00 | £20.00 | |
|
| 1” square drive 65mm - 75mm | £15.00 | £30.00 | |
|
| 1” square drive 80mm - 90mm | £17.00 | £34.00 | |
|
| 1” square drive 91mm - 125mm | POA | POA | |
|
| Extension bar 1/2" square drive | £3.00 | £6.00 | ||
| Extension bar 3/4" square drive | £5.50 | £11.00 | ||
| Extension bar 1" square drive | £8.00 | £16.00 | ||
| Universal joint 1/2” | £4.50 | £9.00 | ||
| Universal joint 3/4” | £6.50 | £13.00 | ||
| Universal joint 1” | £9.00 | £18.00 | ||
 |
2/ Impact Wrench | |||
| Used for untightening nuts and bolts. Can also be used for tightening nuts and bolts but care should be taken as the speed of the machine means that the correct torque can be hit and over tightened very quickly. If you are in doubt please ask for advise on the correct size machine to use. | ||||
| 1/2” square drive 110 volts 12mm - 20mm bolt capacity. 294Nm torque | £15.00 | £30.00 | |
|
| 3/4” square drive 110 volts 16mm - 22mm bolt capacity. 588Nm torque | £19.00 | £38.00 | |
|
 |
||||
| 1” square drive 110 volts 18mm - 27mm bolt capacity 700Nm torque | £26.00 | £52.00 | |
|
| 1/2” square drive pneumatic requires 16cfm 12mm - 22mm bolt capacity 350Nm torque | £16.00 | £32.00 | |
|
| 3/4” square drive pneumatic requires 20cfm 16mm - 27mm bolt capacity 725Nm | £19.00 | £38.00 | |
|
| 1” square drive pneumatic requires 25cfm 24mm - 39mm bolt capacity 2000Nm torque | £25.00 | £50.00 | |
|
| 1” square drive petrol 2 stroke 22mm - 30mm bolt capacity 1360Nm torque | £31.00 | £62.00 | ||
| 1 1/2” square drive back handle pneumatic requires 84cfm 36mm - 45mm bolt capacity 4000Nm torque | £62.50 | £125.00 | |
|
 |
||||
| 1 1/2” square drive double handle pneumatic requires 64cfm 36-52mm bolt capacity 6600 torque | £62.50 | £125.00 | |
|
| 1/2” square drive angle head pneumatic requires 9cfm 6mm bolt capacity 145Nm torque | £22.50 | £45.00 | ||
| 1” square drive angle head pneumatic requires 25cfm 24mm - 38mm bolt capacity 1000Nm torque | £52.50 | £105.00 | |
|
 |
3/ Ratchets | |||
| for use with sockets, makes for speedy tightening and untightening in confined areas. | ||||
| Hand 1/2” square drive | £4.50 | £9.00 | ||
| Hand 3/4” square drive | £6.00 | £12.00 | ||
| Hand 1” square drive | £11.00 | £22.00 | ||
| Pneumatic 1/2" square drive. Req 2.5cfm | £13.00 | £26.00 | ||
 |
4/ Spanners | |||
| A comprehensive range of engineering spanners. Flogging spanners for use with hammers for stubborn nuts, Podgers for aligning holes, large size flat and combination spanners for the odd job | ||||
| Flogging spanners 19mm - 40mm | £6.00 | £12.00 | |
|
| Flogging Spanners 41mm - 75mm | £8.50 | £17.00 | |
|
| Flogging spanners 76mm - 100mm | £12.00 | £24.00 | |
|
| Podger spanners 17mm - 36mm | £6.00 | £12.00 | |
|
| Podger spanners 38mm - 65mm | £12.00 | £24.00 | |
|
| Flat and Combination spanners upto 50mm | £6.00 | £12.00 | |
|
 |
5/ T Bars | |||
| Use with sockets in place of a ratchet. | ||||
| Tee bar 3/4” square drive | £6.50 | £13.00 | ||
| Tee bar 1” square drive | £10.50 | £21.00 | ||
 |
6/ Torque Multipliers | |||
| Used in conjunction with torque wrenches Torque multipliers increase the torque that can be applied by the operator. Because the power output cannot exceed the the power input, the output revolutions will be lower than the input revolutions (Torque x rpm = power) Ensuring that the reaction arm is stationary, the output torque will increase by the factor ratio x input torque. | ||||
| 1700nm 5 - 1 ratio 1/2” input 3/4” output | £21.00 | £42.00 | |
|
| 1700nm 5 - 1 ratio 3/4” input 1” output | £21.00 | £42.00 | |
|
| 3000nm 10.5 - 1 ratio 1/2” input 1” output | £33.00 | £66.00 | |
|
| 3400nm 25 - 1 ratio 1/2” input 1 1/2” output | £50.00 | £100.00 | |
|
| 6000nm 25 - 1 ratio 1/2 input 1 1/2” output | £90.00 | £180.00 | |
|
| 9500nm 25 - 1 ratio 3/4 input 1 1/2" output | £125.00 | £250.00 | |
|
 |
7/ Torque Wrench | |||
| Selecting the correct model will allow the the tightening of bolts to a preset value. Conversion = Pounds force feet x 1.356 = Newton metres | ||||
| Torque Wrench 1/2” square drive 8 - 54Nm | £10.00 | £20.00 | |
|
| Torque Wrench 1/2” square drive 40 - 280Nm | £10.00 | £20.00 | |
|
| Torque Wrench 1/2” square drive 70 - 330Nm | £10.00 | £20.00 | |
|
 |
||||
| Torque Wrench 3/4” square drive 140 - 560Nm | £13.00 | £26.00 | |
|
| Torque Wrench 3/4” square drive 700 - 1500Nm | £27.50 | £55.00 | |
|
| Torque Wrench 1” square drive 480 - 940Nm | £27.50 | £55.00 | |
|
| Torque Wrench 1” square drive 500 - 1000Nm | £27.50 | £55.00 | |
|
| Torque Wrench 1” square drive 500 - 1500Nm | £27.50 | £55.00 | |
|
Nationwide Delivery
- Tel: 0114 2753666
- Fax: 0114 2754183
